Bollinger Bands
Last updated
Was this helpful?
Last updated
Was this helpful?
Bollinger Bands indicate relative high and low prices, using this information you can buy relatively low and sell relatively high.
With this strategy you can configure at which percentage from the lower Bollinger Band Gunbot should buy, and at which percentage from the upper Bollinger Band a sell order should be placed. Orders are placed as soon as price meets the set distance from the Bollinger Bands.
Example of how trading with this strategy can perform. Details and settings.
The infographic below describes what triggers trades with this strategy.
Note that this description is kept simple intentionally. In reality prices also need to be below BUY_LEVEL before a buy is triggered.
__
Following settings options are available for bb and can be set in the strategy configurator of the GUI or the strategies section of the config.js file.
These settings are global and apply to all pairs running this strategy. When you want a specific parameter to be different for one or more pairs, use an override at the pair level.
Using the BUY_METHOD and SELL_METHOD parameters you can combine different methods for buying and selling. This strategy page assumes both BUY_METHOD and SELL_METHOD are set to bb. Accepted values are all strategy names as listed here.
__
Buy settings are the primary trigger for buy orders. These parameters control the execution of buy orders when using ADX as buy method.
Set this to false to prevent Gunbot from placing buy orders.
This sets the target for buying at a percentage below the lowest EMA. Additionally price must reach LOW_BB.
When you set this to 1, buy orders will only be placed when the current price is at least 1% below the currently lowest EMA.
"Never Buy Above". Use this to only allow buy orders below the last sell rate.
This sets the minimum percentage difference between the last sell order and the next buy. The default setting of 0 disables this option.
When set to 1, Gunbot will only place a buy order when the strategy buy criteria meet and price is at least 1% below the last sell price.
With this setting enabled, Gunbot will try to take any buy chance between the strategy entry point and your setting for TBUY_RANGE.
As soon as the ask price drops below the upper border of this range (called "Take Buy"), it will trail down with a range of TBUY_RANGE and place a buy order as soon as the ask price crosses up "Take Buy". Confirming indicators in use are respected.
Normal strategy buy orders are still possible while using TAKE_BUY.
This option should not be used together with reversal trading.
This sets the buy range for TAKE_BUY.
When set to 0.5, the initial trailing stop is set 0.5% above the entry point defined by BUY_LEVEL.
Sell settings are the primary trigger for sell orders. These parameters control the execution of sell orders when using bb as sell method.
Set this to false to prevent Gunbot from placing sell orders.
This sets the minimum target for selling. Gunbot will sell once price reaches the set percentage above the break-even point. and HIGH_BB is reached.
If you want to have at least 2% profit per trade, set this to 2.
With this setting enabled, Gunbot will try to take any possible profit between the break-even point and your strategy exit point. This can be useful, for example, on days where the markets move very slowly.
It works by trailing prices upwards between the break-even point and the strategy exit point, with a configurable range for trailing: TP_RANGE. A sell order will be placed when the trailing stop limit is hit or strategy sell conditions are reached. Confirming indicators in use are respected.
Sells at minimal loss are possible when using TAKE_PROFIT, acting as a sort of mini stop loss.
This option should not be used together with reversal trading or DOUBLE_CHECK_GAIN
This sets the sell range for TAKE_PROFIT.
When set to 0.5, the initial trailing stop is set 0.5% below the break-even point.
Enable this to only allow sell orders above the break-even point.
This is an extra check that looks at your recent trading history to verify GAIN will be reached before placing a sell order.
Relevant indicators for trading with bb.
These settings have a direct effect on trading with bb.
This sets the candlestick period used for trading, this affects all indicators within the strategy.
Only use supported values.
Setting a short period allows you to trade on shorter trends, but be aware that these will be noisier than longer periods.
This sets the target for buying. Negative values are allowed.
The bot will buy when price hits the set percentage from the lower Bollinger Band and the price is below the entry point as defined by BUY_LEVEL.
When set to 0, the lower Bollinger Band is the target. When set to 30, the target is 30% above the lower Bollinger Band - the upper band is at 100% from the lower band. Negative values are allowed.
This sets the target for selling. Negative values are allowed.
The bot will sell when price hits the set percentage from the upper Bollinger Band and GAIN is reached.
When set to 0, the upper Bollinger Band is the target (well, almost). When set to 30, the target is 30% under the upper Bollinger Band - the lower band is at 100% from the upper band. Negative values are allowed.
This defines the number of periods used for calculating Bollinger Bands.
This value defines the multiplier used for calculating Bollinger Bands.
Set this to the amount of candlesticks you want to use for your slow EMA. The closing price for each candle is used in the slow EMA calculation.
For example: when you set PERIOD to 5, and want to use 2h for slow EMA – you need to set EMA1 to 24 (24 * 5 mins).
Set this to the amount of candlesticks you want to use for your medium EMA. The closing price for each candle is used in the fast EMA calculation.
For example: when you set PERIOD to 5, and want to use 1h for medium EMA – you need to set EMA2 to 12 (12 * 5 mins).
Parameters to configure additional trailing for various types of orders. Trailing works just like it does for the TSSL strategy, the difference being the starting point of trailing.
Orders resulting from trailing are only placed when the main strategy criteria are met, and confirming indicators (if any) allow the order. All these conditions must occur in the same cycle.
The following parameters in config.js have no function for this strategy and act as placeholder.
Parameter
Description
ATRX
Placeholder.
ATR_PERIOD
Placeholder.
BUYLVL1
Placeholder.
BUYLVL2
Placeholder.
BUYLVL3
Placeholder.
BUYLVL
Placeholder.
BUY_RANGE
Placeholder.
DISPLACEMENT
Placeholder.
FAST_SMA
Placeholder.
ICHIMOKU_PROTECTION
Placeholder
KIJUN_CLOSE
Placeholder.
KIJUN_PERIOD
Placeholder.
KIJUN_STOP
Placeholder.
KUMO_CLOSE
Placeholder.
KUMO_SENTIMENTS
Placeholder.
KUMO_STOP
Placeholder.
LEVERAGE
Placeholder.
LONG_LEVEL
Placeholder.
MACD_LONG
Placeholder.
MACD_SHORT
Placeholder.
MACD_SIGNAL
Placeholder.
MAKER_FEES
Placeholder.
MEAN_REVERSION
Placeholder.
PP_BUY
Placeholder.
PP_SELL
Placeholder.
PRE_ORDER_GAP
Placeholder.
PRE_ORDER
Placeholder.
RENKO_ATR
Placeholder.
RENKO_BRICK_SIZE
Placeholder.
RENKO_PERIOD
Placeholder.
ROE_CLOSE
Placeholder.
ROE_LIMIT
Placeholder.
ROE_TRAILING
Placeholder.
ROE
Placeholder.
SELLLVL1
Placeholder.
SELLLVL2
Placeholder.
SELLLVL3
Placeholder.
SELLLVL
Placeholder.
SELL_RANGE
Placeholder.
SENKOUSPAN_PERIOD
Placeholder.
SHORT_LEVEL
Placeholder.
SLOW_SMA
Placeholder.
TENKAN_CLOSE
Placeholder.
TENKAN_PERIOD
Placeholder.
TENKAN_STOP
Placeholder.
TSSL_TARGET_ONLY
Placeholder.
USE_RENKO
Placeholder.
