Russian
От переводчика
Pingpong
This page describes how margin trading on Bitmex works with the PingPong strategy. The triggers for trades are slightly different than in the same strategy for regular trading.

How to work with this strategy

Expected behavior for margin trading
Gunbot will open one position, either long or short, and close this position when the target is reached. When the stop is hit before profitably closing a trade, Gunbot will place a stop order at loss. After closing a position, Gunbot will again look to open a new long or short position. Gunbot will not add to existing open positions.
Please don't manually add to or reduce positions opened by Gunbot, unless you stop running Gunbot on this trading pair until you've closed this position.
The examples below show how the basic triggers for pp work. Additionally, you can use confirming indicators and settings like ROE trailing.

Long (regular: trend following)

  • A long position is opened when the ask price is equal to or above PP_BUY.
  • Position is closed when the desired ROE (return on equity) is reached. This is a percentage from the entry point, not taking leverage into consideration. Regardless what leverage is used, 1% price difference from your entry equals ROE: 1.
  • A position is closed at loss when STOP_BUY is reached. This is a percentage from the entry point in the opposite direction of your profit target, not taking leverage into consideration. Regardless what leverage is used, 1% price difference from your entry equals STOP_BUY: 1.

Short (regular: trend following)

  • A short position is opened when the bid price is equal to or below PP_SELL.
  • Position is closed when the desired ROE (return on equity) is reached. This is a percentage from the entry point, not taking leverage into consideration. Regardless what leverage is used, 1% price difference from your entry equals ROE: 1.
  • A position is closed at loss when STOP_SELL is reached. This is a percentage from the entry point in the opposite direction of your profit target, not taking leverage into consideration. Regardless what leverage is used, 1% price difference from your entry equals STOP_SELL: 1.

Long (mean reversion mode)

In MEAN_REVERSION mode the behavior for PP_BUY and PP_SELL is reversed in this strategy.
  • A long position is opened when the ask price is equal to or below PP_BUY.
  • Position is closed when the desired ROE (return on equity) is reached. This is a percentage from the entry point, not taking leverage into consideration. Regardless what leverage is used, 1% price difference from your entry equals ROE: 1.
  • A position is closed at loss when STOP_BUY is reached. This is a percentage from the entry point in the opposite direction of your profit target, not taking leverage into consideration. Regardless what leverage is used, 1% price difference from your entry equals STOP_BUY: 1.

Short (mean reversion mode)

In MEAN_REVERSION mode the behavior for PP_BUY and PP_SELL is reversed in this strategy.
  • A short position is opened when the bid price is equal to or above PP_SELL.
  • Position is closed when the desired ROE (return on equity) is reached. This is a percentage from the entry point, not taking leverage into consideration. Regardless what leverage is used, 1% price difference from your entry equals ROE: 1.
  • A position is closed at loss when STOP_SELL is reached. This is a percentage from the entry point in the opposite direction of your profit target, not taking leverage into consideration. Regardless what leverage is used, 1% price difference from your entry equals STOP_SELL: 1.

Strategy parameters

Following settings options are available for pp and can be set in the strategy configurator of the GUI or the strategies section of the config.js file.
These settings are global and apply to all pairs running this strategy. When you want a specific parameter to be different for one or more pairs, use an override at the pair level.
Using the BUY_METHOD and SELL_METHOD parameters you can combine different methods for buying and selling. This strategy page assumes both BUY_METHOD and SELL_METHOD are set to pp. Accepted values are all strategy names as listed here.

Margin settings

Margin settings control settings like leverage and the target for ROE. These parameters are relevant when using pp as buy and/or sell method.

ROE

This sets the target for closing a position.
ROE is the Return On Equity for a position, the percentage profit and loss on your invested margin. This value is calculated in a similar way to how Bitmex calculates it, it does include leverage and does not include fees.
Examples: Long position, 1x leverage. When price moves 1% above the average entry price, 1% ROE is reached.
Long position, 100x leverage (or cross leverage). When price moves 1% above the average entry price, 100% ROE is reached.
Short position, 20x leverage When price moves 1% below the average entry price, 20% ROE is reached.
Values: numerical – represent a percentage.
Default value: 1
Parameter name in config.js: ROE

Leverage

Sets the leverage for opening any position. Setting 0 places the order with cross margin.
Values: numerical
Default value: 0
Parameter name in config.js: LEVERAGE

Stop Buy

Places a market stop order for a long position, at the same time as the position is opened.
When set to 1 and a long order is opened at a price of 100, a stop market order will be placed at 99.
Values: numerical - represents a percentage.
Default value: 0
Parameter name in config.js: STOP_BUY

Stop Sell

Places a market stop order for a short position, at the same time as the position is opened.
When set to 1 and a short order is opened at a price of 100, a stop market order will be placed at 101.
Values: numerical - represents a percentage.
Default value: 0
Parameter name in config.js: STOP_SELL

ROE Trailing

Use this to enable tssl-style trailing for ROE.
Values: true or false
Default value: false
Parameter name in config.js: ROE_TRAILING

ROE Limit

This sets the range for ROE trailing.
Setting a range of 5% at a ROE target of 1 would set an initial range between 0.95 and 1.05.
As long as ROE keeps increasing, the range moves along with ROE. As soon as ROE start decreasing, the lower range gets frozen. A close order is placed when ROE crosses the lower limit.
Values: numerical – represent a percentage of ROE.
Default value: 1
Parameter name in config.js: ROE_LIMIT

Pre Order

When set to true, limit orders will placed at a configurable rate beyond the best bid/ask price to get ahead of the order book.
Values: true or false
Default value: false
Parameter name in config.js: PRE_ORDER

Pre Order Gap

Sets the gap between the best bid/ask price in the orderbook and the rate at which a limit order gets placed. Long orders are placed at ask + gap. Short orders are placed at bid - gap.
It is possible to use negative values, this will increase the chance of receiving maker fees.
Example when set to 1 and a buy signal occurs at an ask price of 100: a limit order gets placed at a rate of 101. When set to -1 and a buy signal occurs at an ask price of 100: a limit order gets placed at a rate of 99.
Don't use a negative gap together with STOP_BUY and/or STOP_SELL, as these stops do not combine well with position that do not always fill. Instead use STOP_LIMIT.
Values: numerical - represents a percentage.
Default value: 0
Parameter name in config.js: PRE_ORDER_GAP

Mean Reversion

When set to true, the strategy follows a mean reversion way of trading, instead of trend following.
Long and short levels are reversed in this mode, long level is placed below EMA, short level is placed above EMA.
Values: true or false
Default value: false
Parameter name in config.js: MEAN_REVERSION

Buy settings

Buy settings are the primary trigger for opening long positions. These parameters control the execution of buy orders when using gain as buy method.

Buy enabled

Set this to false to prevent Gunbot from placing buy orders.
Values: true or false
Default value: true
Parameter name in config.js: BUY_ENABLED

PP Buy

This sets the exact target price for placing a buy order. A buy order will be placed as soon as this price is hit or an even better price is available.
For example: when trading a BTC-x pair with PP_BUY set to 0.00123456, a buy order will be placed in the first cycle where the ask price is 0.00123456 or lower.
Values: numerical – represents a price in base currency.
Default value: 0
Parameter name in config.js: PP_BUY

NBA

"Never Buy Above". Use this to only allow buy orders below the last sell rate.
This sets the minimum percentage difference between the last sell order and the next buy. The default setting of 0 disables this option.
When set to 1, Gunbot will only place a buy order when the strategy buy criteria meet and price is at least 1% below the last sell price.
Values: numerical, represents a percentage.
Default value: 0
Parameter name in config.js: NBA

Sell settings

Sell settings are the primary trigger for opening short positions. These parameters control the execution of sell orders when using gain as sell method.

Sell enabled

Set this to false to prevent Gunbot from placing sell orders.
Values: true or false
Default value: true
Parameter name in config.js: SELL_ENABLED

PP Sell

This sets the exact target price for placing a sell order. A sell order will be placed as soon as this price is hit or an even better price is available.
For example: when trading a BTC-x pair with PP_SELL set to 0.00123456, a buy order will be placed in the first cycle where the bid price is 0.00123456 or lower.
Values: numerical – represents a price in base currency.
Default value: 0
Parameter name in config.js: PP_SELL

Indicator settings

As pp is purely price based, there are no indicators that directly influence trading with pp.

Balance settings

Confirming indicators + advanced indicator settings

Misc settings

Dollar cost avg settings

DCA is not intented to be used for margin trading.

Reversal trading settings

RT is not intented to be used for margin trading.

TrailMe settings

With margin trading, additional trailing only works when MEAN_REVERSION is enabled.
Parameters to configure additional trailing for various types of orders. Trailing works just like it does for the TSSL strategy, the difference being the starting point of trailing.
Orders resulting from trailing are only placed when the main strategy criteria are met, and confirming indicators (if any) allow the order. All these conditions must occur in the same cycle.

Placeholders

The following parameters in config.js have no function for this strategy and act as placeholder.
Last modified 2yr ago
Copy link
On this page
How to work with this strategy
Long (regular: trend following)
Short (regular: trend following)
Long (mean reversion mode)
Short (mean reversion mode)
Strategy parameters
Margin settings
ROE
Leverage
Stop Buy
Stop Sell
ROE Trailing
ROE Limit
Pre Order
Pre Order Gap
Mean Reversion
Buy settings
Buy enabled
PP Buy
NBA
Sell settings
Sell enabled
PP Sell
Indicator settings
Balance settings
Confirming indicators + advanced indicator settings
Misc settings
Dollar cost avg settings
Reversal trading settings
TrailMe settings
Placeholders